https://xinyerunhua.en.made-in-china.com
CJ-4
Hengmei
Product Overview
This product is formulated with high viscosity index fully synthetic base oils and high-performance compound additives. It meets API CJ-4 specifications and is suitable for modern National V / VI diesel engines equipped with DPF, SCR and EGR exhaust aftertreatment systems. Featuring long service life, low ash content and extended oil change intervals.
Performance Characteristics
Low-ash & eco-friendly formula, effectively protects exhaust aftertreatment systems;
Excellent oxidation and thermal stability, restraining soot thickening and sludge formation;
High-efficiency extreme pressure and anti-wear agents form tough oil film under high temperature and pressure to reduce wear of cylinder liners, bearings and gears;
Good compatibility with rubber seals, preventing aging and swelling, lowering oil leakage and oil consumption.
Application Range
Suitable for National V / VI emission diesel engines equipped with DPF/SCR/EGR/DOC exhaust aftertreatment systems.
Ideal for high-power high-speed diesel engines of heavy trucks, long-distance cargo vehicles, tractors, buses, construction machinery, generator sets and large agricultural machinery.
Typical Data
Viscosity Grade | 15W40 | 20W50 | Test Method |
Appearance | Transparent | Transparent | Visual |
Kinematic Viscosity（100℃）/ (mm2/s） | 15.42 | 19.96 | GB/T 265 |
Cold Cranking Viscosity∕（mPa.s）(-20℃) ≤ | 5235 | 6794 | GB/T 6538 |
Pour Point∕℃ ≤ | -30 | -26 | GB/T 3535 |
Flash Point(open)∕℃ ≥ | 240 | 284 | GB/T 3536 |
Foaming Characteristics (Foam Tendency / Foam Stability)∕(mL∕mL) SequenceⅠ (24℃) ≤ SequenceⅡ (93.5℃) ≤ SequenceⅢ (After24℃) ≤ | 10/0 10/0 10/0 | 10/0 10/0 10/0 | GB/T 12579 |
HTHS Viscosity(150℃,106S-1) ∕(mPa.s) ≥ | 4.2 | 4.5 | SH/T0703 |
Evaporation Loss (mass fraction) / %，Noack Method（250℃,1h） ≤ | 8 | 6 | SH/T0059 |
Moisture / % (Volume Fraction) ≤ | Trace | Trace | GB/T 260 |
Mechanical Impurities / % (Mass Fraction) ≤ | No | No | GB/T 511 |
Company Introduction
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. was established in 1989, located in Henan Puyang City, the central of Zhongyuan Oil Field. The R&D center of the company is more than 1200 square meters, with 15 researchers and 5 people with master degree or above. With 100,000 tons/year of grease production capacity; 100,000 tons/year lubricating oil production capacity. It is the leading grease production and marketing base in China. The company sets up 9 sales branches. The products cover most parts of our country and realize the synchronous output of the whole link of production, research, storage and transportation, sales and service.
The company has a grease automatic blending and packaging production line, the laboratory has innovative research and development capability, the products cover general grease, special grease, precision machinery grease, construction machinery grease, metallurgical industry special grease, internal combustion engine oil, industrial oil, construction machinery oil and other 21 categories of more than 320 varieties. Widely used in automobile, machinery, metallurgy, mining, petroleum processing, electronics, bearings and many other fields.
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. is committed to the development and service of China's lubricant industry, actively participates in international competition, and provides more efficient, environmental protection and energy saving lubrication solutions for global customers. Adhering to the spirit of craftsmanship, we will strive to promote the construction of industrial 4.0 smart factories and contribute to the new development of Made in China 2025 strategy.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 37 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.
