You are here: Home » Products » Zhongyuan Oilfield Industry Center » Grease » Anti Corrosion Multi Purpose General Lithium Base Grease

Anti Corrosion Multi Purpose General Lithium Base Grease

General Purpose Lithium Grease is a multi-purpose grease manufactured by thickening refined mineral oil with lithium stearate soap as the thickener, and fortified with oxidation inhibitors, rust inhibitors and other additives.

Quantity:
Availability:





Inquire Add to Basket

Model:
Multipurpose lithium base grease
Brand:
Hengmei

Product Description

Lithium Grease "Brand Hengmei"

1. PRODUCT INTRODUCTION

General Purpose Lithium Grease is a multi-purpose grease manufactured by thickening refined mineral oil with lithium stearate soap as the thickener, and fortified with oxidation inhibitors, rust inhibitors and other additives.

2. PERFORMANCE CHARACTERISTIC

Excellent water resistance, not easily washed out under humid or outdoor conditions.

Good rust and corrosion protection for metal friction parts.

Outstanding mechanical stability, no thinning or hardening during long-term service.

3. APPLICATIONS

It is suitable for the lubrication of rolling bearings and sliding bearings in general machinery, such as bearings in automotive chassis, engine bearings, excavators, forklift trucks, as well as small and medium-sized motor bearings.

Operating temperature range: -20℃～120℃

4. PRODUCT SPECIFICATION

Item	Typical Data			Test Method
	NLGI 1	NLGI 2	NLGI 3
Appearance	Smooth Grease	Smooth Grease	Smooth Grease	Visual
Worked Penetration (25℃) 0.1mm	322	275	238	GB/T 269
Dropping Point (℃)	187	196	200	GB/T 3498
Apparent Viscosity (-15℃,10s^-1),Pa·s	420	473	691	SH/T 0048
Impurities (Microscopic Method) ≥10μm ≥25μm ≥75μm ≥125μm	880 440 40 0	880 440 40 0	880 440 40 0	SH/T 0336
Oxidation Stability (99℃,100h,0.760MPa) Pressure Drop, MPa	0.052	0.050	0.050	SH/T 0325
Oil Separation (Steel Mesh Method)（%）	3.6	1.2	1.0	SH/T 0324
Copper Corrosion（100℃，24h）	Pass	Pass	Pass	GB/T 7326 (B）
Evaporation Loss（99℃，22h），%	1.45	1.45	1.1	GB/T 7325
Corrosion Preventive Property(52℃，48h）	Qualified	Qualified	Qualified	GB/T 5018
Water Washout（38℃，1h）	4.8	3.4	1.4	SH/T 0109
Prolonged Worked Penetration (100,000 strokes)0.1mm	365	319	304	GB/T 269

5. COMPANY INTRODUCTION

Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province.

After 37 years of steady development, the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales. grease design capacity is 100,000 tons,10 grease production lines, 38 sub-assembly production lines,lubricant design capacity is 100,000 tons, 12 lubricant production lines, two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons. the company's products have outstanding performance, complete varieties and distinct grades.

Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.

Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties.

At the same time, the company also provides OEM, ODM custom foundry services.

6. FAQ

1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 37 years of industry experience. Our factory is located in Puyang City, Henan Province.

2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.

3. What is your terms of payment?
Based on our sales policy, L/C or T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We can provide you with real photos or video of the goods before balance payment.

4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.

5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.

6. Can I get some samples from your side?
We can provide free samples, the freight cost will be born by you.

7. Is it possible to do ODM or OEM for us?
We would like to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples, that will be helpful for us to do test.